同位素 ›› 2010, Vol. 23 ›› Issue (1): 10-14.DOI: 10.7538/tws.2010.23.01.0010

• 放射性药物和标记化合物 • 上一篇    下一篇

液相法合成11C-CH3I的影响因素

李琳1;孙 华1;黄飞杰1;李敏聪1;张锦明2   

  1. 1. 昆明医学院 第三附属医院,云南省肿瘤医院 PET/CT中心,云南 昆明 650018;2. 解放军总医院 核医学科,北京 100853
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-02-20 发布日期:2010-02-20

Influential Factors of Liquid Phase Method to Synthesize 11C-CH3I

LI Lin1;SUN Hua1;HUANG Fei-jie1;LI Min-cong1;ZHANG Jin-ming2   

  1. 1.PET/CT Center, the 3rd Affilated Hospital of Kunming Medical University, Tumor Hospital of Ynnan Province, Kunming 650018, China;2.Department of Nuclear Medicine, the PLA General Hospital, Beijing 100853, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-02-20 Published:2010-02-20

摘要: 本工作对11C-CH3I合成过程中加速器靶内释放11CO2速度、捕获环释放11CO2时间、加热除四氢呋喃(THF)时间、LiAlH4/THF的用量、57% HI用量及冷却反应管时间等因素对合成效率的影响进行了研究,并对以上参数进行了优化,提高了11C-CH3I的合成效率。经过10批次的条件优化实验,11C-CH3I的合成效率为85%±2.3%,放化纯度大于99%。实验同时表明,LiAlH4/THF和57%HI用量是影响11C-CH3I合成效率的主要因素。

关键词: 11C-CH3I, 自动化合成, 影响因素

Abstract: 11C-CH3I is a very important methylated precursor in radiopharmaceuticals methylation, however, its yield is low since the 11C half-decay time is short and its synthesis condition is difficult. Most possible factors effect on 11C-CH3I synthesis yield were investigated, such as the release rate of 11CO2 from cyclotron target, the release time of 11CO2 by capture ring (LOOP ring), the evaporation time of THF, the volum of THF with LiAlH4, the quantity of 57% HI, and the cooling time of reaction tube. After the 10 th system temperature of the module was optimized, the synthesis yield of 11C-CH3I was 85%±2.3%, the radiochemical purity was more than 99%. Mean while, the results indicated that the main factors of synthesis yield were the the volum of
THF with LiAlH4 and the quantity of 57% HI.

Key words: 11C-CH3I, automated synthesis, the influential factors